Search

Japanese style geta.
Traditional style lightweight laquered paulownia wood geta clogs for wearing with kimono or yukata.
Padded toe thongs in greenish blue wave pattern fabric.
Rubber sole.
Square toe, men's traditional style.
 
Size: 25cm long, 10cm wide.
Uk size approx. 6-8

Material: paulownia wood base with rubber sole, cotton and synthetic toe thong.

Age: pre-owned, unused

Condition: unused, as new

Japanese Yukimi (snow viewing) Model Decorative Lanterns with optional LED light

3d printed Japanese decorative ornamental model lanterns in a range of different sizes and colours.
Printed in PLA bioplastic filament.

Choice of two sizes:
Standard approx. 12cm tall x 9cm wide
Mini approx. 7cm tall x 5cm wide

Choice of colour: white, black, grey marble effect

The standard lanterns have a diffuser inside to filter light passing through and create a glowing effect.
These standard lanterns can be supplied with a battery powered LED nightlight as an optional extra.
Battery not included.
Mini lanterns are not supplied with an optional light, but could be fitted with an LED bulb as part of a diorama etc.

These lanterns are individually printed in the UK by us at the Kimono Garden.

Note - as the lanterns are individually printed there may be slight variations between the prints.
Please only use artificial nightlights as proximity to hot flames will damage the lantern.
3D prints are built up in layers. There will be some visible layering due to the nature of the printing process.
Care of your lantern: do not expose to extremes of high or low temperatures or humidity.
Batteries not included.

Warning: These are decorative items and not toys. These should not be given to young children as small parts could be a choking hazard.
The lanterns are quite sturdy but can break if dropped or subjected to force.

Size: 12x9cm, 7x5cm

Material: PLA (non-petroleum bioplastic)

Age: new

Condition: new

Delivery: approx. 4-6 days.

(3D printed model based on a design by by Keenan licensed under the Creative Commons - Attribution license https://www.thingiverse.com/thing:4969135
and by alexb49 licensed under the Creative Commons - Attribution license https://www.thingiverse.com/thing:5030256)

Vintage Japanese tomesode kimono, black with five mon.

Women's tomesode kimono. Black chirimen silk crepe with creamy white soft silk lining.
This is a formal style of kimono, traditionally worn by married women and geisha.
The decoration is found on the lower part of the kimono only.
Design of pine needles floating in a stream, with five omodaka crests (encircled water plantain).
Two mon (crests) on front panels, three on back panels.
Some of the pine needles are edged with gold coloured ribbon.
 
Size: Length 154cm. Sleeve to sleeve 124cm. Sleeve length 46cm. Shoulder width 60cm.

Material: chirimen silk crepe

Age: vintage/used

Condition: excellent

Print of our illustrated map of Japan showing the main islands and Prefectures

High quality A3 sized prints available on matte paper.

Size: A3

Material: Matte paper 130gsm or Premium Varnished Matte paper option 170gsm

Age: new

Condition: new

Delivery: approx. 5-7 days.

Note: image ©AlgolDesigns. This is an edited version of our design for print.
This print edition is only available from The Kimono Garden, however licences for our original image
are available from our catalogue at various stock image sites.

Vintage Japanese kimono, brown with squares pattern.
Men's vintage silk kimono. Lightweight mid brown silk with pattern of brown squares and white dots.
Dark blue lining.

Size: Length 131cm. Sleeve to sleeve 123cm. Sleeve length 50cm. Shoulder width 65cm.

Material: silk

Age: vintage/used

Condition: fairly good. Marks on lining near lower hem, small hole in lining,
small amount of fraying on back seam, water mark on upper back (see photos).

3D Lithophane Print of "The Great Wave off Kanagawa" by Katsushika Hokusai c.1830–32.

Translucent curved print of Hokusai's famous woodblock print "The Great Wave off Kanagawa".
This is a free-standing 3d print which has a 3d etched effect when back lit.
The print looks best when lit from behind by bright daylight, eg. on a window ledge, or by a nightlight (not supplied).

These are individually printed in the UK by us at the Kimono Garden.

Note - these are reproductions of old prints, there may be flaws or marks
on the original, which will appear on the reproduction.
As they are individually printed there may be slight variations between the prints.
Please only use artificial nightlights as proximity to hot flames will damage the print.
3D prints are built up in layers. There will be some visible layering due to the nature of the printing process.
Care of your print: do not expose to extremes of high or low temperatures or humidity.

Warning: Fragile! These are very thin prints in order to let light pass through and as such they are delicate.
The print can break if dropped or subjected to force.

Size: 13x10cm

Material: PLA (non-petroleum bioplastic)

Age: new

Condition: new

Delivery: approx. 4-6 days.

Print of "Crane and Wave" by Hiroshige 1830s.

High quality reproduction prints available on matte paper.
Note - these are reproductions of old prints, there may be flaws or marks
on the original, which will appear on the reproduction.

Size: 40x30cm

Material: Museum-quality prints on archival, acid-free matte paper.
The prints have a silky finish which can be scratched.
Please handle with care.

Framed (option): lightweight semi-hardwood alder frame in black
with acrylite front protector. Hanging fixings included.